Front Differential: Inspection
WARNING: This page is about a different variant/trim than selected.
NOTE:
- For backlash between the differential bevel gear and differential bevel pinion, refer to "ASSEMBLY". Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580 CROSSTREK)>FRONT DIFFERENTIAL>ASSEMBLY .
- For backlash and tooth contact inspection of hypoid gear set, refer to "DRIVE PINION". Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580 CROSSTREK)>DRIVE PINION>INSTALLATION .
- Check each part for excessive wear.
- Check that there is no deformation, cracks or other damages.
- Check the bearing for smooth rotation.