Diagnostic Procedure With Cancel Code: 13

Detected when clutch pedal is depressed or malfunction related to clutch switch occurs.

Trouble symptom: 

• Cruise control cannot be set.
• Cruise control cannot be released.

Wiring diagram: 

Cruise control system Ref. to WIRING SYSTEM (IMPREZA MODEL)>CRUISE CONTROL SYSTEM>WIRING DIAGRAM . Ref. to WIRING SYSTEM (CROSSTREK MODEL (EXCEPT FOR HEV))>CRUISE CONTROL SYSTEM>WIRING DIAGRAM .

Courtesy of SUBARU OF AMERICA, INC.

1. PERFORM UNIT INSPECTION OF CLUTCH SWITCH  .

   Check the clutch switch Ref. to CRUISE CONTROL SYSTEM>CLUTCH SWITCH .

   Is the check result of the clutch switch unit and installation position OK?

   Yes:  Go to  2.

   No:  Replace the clutch switch. Or adjust the installation position.

2. CHECK CLUTCH SWITCH CIRCUIT  .
   1. Turn the ignition switch to OFF.
   2. Disconnect the clutch switch connector.
   3. Turn the ignition switch to ON.
   4. Measure the voltage between the clutch switch connector and chassis ground.

      Connector and terminal 

      (B107) No. 1 (+) - Chassis ground (-):

   Is the voltage 10 V or more?

   Yes:  Go to  3.

   No: 

   • Check fuse No. 19 (fuse and relay box).
   • Check open or shorted circuit of harness between clutch switch and fuse and relay box.
3. CHECK CLUTCH SWITCH CIRCUIT  .
   1. Turn the ignition switch to OFF.
   2. Disconnect the ECM connector.
   3. Measure the resistance between clutch switch connector and ECM connector.

      Connector and terminal 

      (B107) No. 2 - (B134) No. 28:

   Is the resistance less than 10 Ω?

   Yes:  Replace the ECM. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>ENGINE CONTROL MODULE (ECM) .

   No:  Repair the harness.