Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2020 >> Outback Limited XT >> Repair and Diagnosis >> Electrical >> Charging Systems >> Engine Starting System & Charging System (2.4L) >> Inrush Current Reduction Relay >> Removal

Inrush Current Reduction Relay: Removal

  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the starter. Refer to STARTING/CHARGING SYSTEMS (H4DOTC)>Starter>REMOVAL .
  3. Remove the adapter harness and cable stay.
  4. Remove the motor cable.
  5. Remove the ICR relay.
G13620778Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals