Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (CVT Transaxle (Tr690) (Service Information)) >> Primary Speed Sensor >> Removal

Primary Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: If water or oil contacts the connector terminal of primary speed sensor, replace it with a new part.
  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the intercooler. Refer to INTAKE (INDUCTION) (H4DOTC)>Intercooler>REMOVAL .
  3. Disconnect the connector, and remove the primary speed sensor.
    G13621958Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals