Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (CVT Transaxle (Tr690) (Service Information)) >> Front Wheel Speed Sensor >> Removal

Front Wheel Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: If water or oil contacts the connector terminal of front wheel speed sensor, replace it with a new part.
  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the center exhaust pipe (rear). Refer to EXHAUST (H4DOTC)>Center Exhaust Pipe>REMOVAL>CENTER EXHAUST PIPE (REAR) .
  3. Disconnect the connector and remove the front wheel speed sensor.
    NOTE: Prepare the container for draining of engine oil.
    G13621961Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals