Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Fuel Injection System (2.4L)) >> Mass Air Flow and Intake Air Temperature Sensor >> Removal

Mass Air Flow and Intake Air Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector (A) and remove the mass air flow and intake air temperature sensor.
    G13619679Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals