Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Seat Heater System >> Removal >> Rear Seat Heater Control Module >> OUTBACK model

OUTBACK model

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work, Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the pad rear side RH. Refer to SEATS>Rear Seat>REMOVAL 
  3. Remove the trim panel assembly apron RH. Refer to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>REMOVAL>OUTBACK model .
  4. Remove the bolt, disconnect the connector and remove the rear seat heater Control Module.
    G13625668Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals