Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Power Seat System >> Installation >> Seat Position Memory Switch (With Seat Position Memory)

Seat Position Memory Switch (With Seat Position Memory)

  1. Install the seat position memory switch assembly.
  2. Install the trim panel front door.
  3. Connect the ground terminal to battery sensor, Refer to REPAIR CONTENTS>NOTE>BATTERY .
  4. When the seat position memory switch is replaced, initialize the power seat & remote control Control Module. Refer to SEATS>Power Seat System>ADJUSTMENT .
scientia non olet · About Mike's Workshop Manuals