Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Trunk Opener Button >> Removal

Trunk Opener Button: Removal

  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel trunk lid. Refer to EXTERIOR/INTERIOR TRIM>Trunk Room Trim>REMOVAL .
  3. Remove the trunk opener button.
    CAUTION: When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.
    1. Disconnect the connector.
    2. Remove it by pressing the lock portion of the trunk opener button as shown in the figure.
      G13625781Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals