Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2020 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Except For HEV) >> Fuel >> Procedure >> Draining Fuel (With Other Than Subaru Select Monitor)

Draining Fuel (With Other Than Subaru Select Monitor)

WARNING: Place "NO OPEN FLAMES" signs near the working area.
CAUTION: Be careful not to spill fuel.
NOTE: If the fuel gauge indicates "F", refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL>PROCEDURE>DRAINING FUEL PARTIALLY .
  1. Open the fuel filler lid and remove the fuel filler cap.
    NOTE: This operation is required to release the inner pressure of the fuel tank.
  2. Remove the fuel pump assembly. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL PUMP>REMOVAL .
  3. Remove the fuel sub level sensor. (Crosstrek model) Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL SUB LEVEL SENSOR>REMOVAL .
  4. Drain the fuel from the fuel tank using the gasoline proof pump.
    CAUTION:
    • Be careful not to spill fuel.
    • Always collect fuel using a dedicated fuel container.
  5. Install the related parts in the reverse order after draining the fuel.
    NOTE: For information about connecting the quick connector on the fuel delivery tube, refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE D) .
scientia non olet · About Mike's Workshop Manuals