Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle (Tr580 CROSSTREK) >> Primary Speed Sensor >> Removal

Primary Speed Sensor: Removal

CAUTION: If water or oil contacts the connector terminal of primary speed sensor, replace it with a new part.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580 CROSSTREK)>TRANSMISSION ASSEMBLY>REMOVAL .
  3. Disconnect the connector, and remove the primary speed sensor.
G13603205Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals