Solenoid Unit

Remove the select lever COMPL. Ref. to CONTROL SYSTEMS>SELECT LEVER>REMOVAL .
Remove the harness connector from the select lever COMPL.

Courtesy of SUBARU OF AMERICA, INC.
Remove the harness from the select lever COMPL.

Courtesy of SUBARU OF AMERICA, INC.
Push down the claw and remove the solenoid unit from the select lever COMPL.

Courtesy of SUBARU OF AMERICA, INC.

Remove the terminal of the solenoid unit using a flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less, KTC connector terminal tool ECC-1T or equivalent.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Wiring color
3	Blue
4	Black

Clean the tip of the solenoid unit.