Radar Sensor: Installation
- Install the radar bracket.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the radar sensor.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the bumper face - rear.
- Connect the battery ground terminal.
Ref. to NOTE>NOTE>BATTERY .
- Perform the adjustment of the radar sensor radar axis.
Ref. to BLIND SPOT DETECTION/REAR CROSS TRAFFIC ALERT>RADAR SENSOR>ADJUSTMENT>RADAR AXIS ADJUSTMENT .