Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2019 >> Outback 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Speed Control System (2.5L)) >> Accelerator Pedal >> Inspection >> Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch to ON. (Engine OFF)
  2. Read the accelerator pedal opening angle signal and voltage of accelerator pedal sensor using Subaru Select Monitor. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>SUBARU SELECT MONITOR>OPERATION>DISPLAY CURRENT ENGINE DATA . Ref. to ENGINE (DIAGNOSTICS) (H6DO)>SUBARU SELECT MONITOR>OPERATION>DISPLAY CURRENT ENGINE DATA .
Accelerator pedal sensor Accelerator pedal opening angle signal Standard
Main 0.0% 0.3 - 1.1 V
100.0% 2.3 - 3.8 V
Sub 0.0% 0.3 - 1.1 V
100.0% 2.3 - 3.8 V
scientia non olet · About Mike's Workshop Manuals