Shift Control

Turn the ignition switch to ON.
While brake pedal is not depressed, check if the select lever does not move from "P" range.
While brake pedal is depressed, check if the select lever moves from "P" range.

Set the selector lever to each gear position and check the shifting while driving the vehicle.

Operate the paddle shift at manual mode and check the shifting while driving the vehicle.

Courtesy of SUBARU OF AMERICA, INC.

Selector position	Gear position
Selector position	1st	2n d	3r d	4t h	5t h	6t h	7t h*
D	Continuously variable speed change

Selector position

Gear position

1st

2n d

3r d

4t h

5t h

6t h

7t h⁽¹⁾

Manual mode

⁽¹⁾	2.5 L model

Set the select lever to other than "P" range. (Models without the keyless access with push button start)
When the ignition switch is turned to OFF, check if the ignition key switch cannot be removed. (Models without the keyless access with push button start)