Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2019 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Starting System & Charging System (3.6L)) >> Battery Sensor >> Removal

Battery Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the clip (A) from the battery holder.
  3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor.
    G10263203Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals