Check List for Interview: Check

Inspect the following items regarding the vehicle's state.

Keyless Access with Push Button Start System Trouble Check List for Interview Received Year Month Date
Customer's name		Registration No.	Initial year of registration Year Month Date
Customer's name		Vehicle model	Frame number
Interviewer	Inspector	Engine type	Odometer reading
Customer specified content
Date and time when the trouble occurred		Frequency of trouble occurrence
Condition of trouble occurrence		Weather
Road conditions		Occurrence location
Accessory installation condition
Trouble condition
□ DTC			□ ()
□ Immobilizer system	Engine does not start		The starter does not turn Starter operates but engine does not start Engine starts but stops immediately
□ Immobilizer system	Does not start with remote engine starter
□ Steering lock system	The steering lock is not released
□ Steering lock system	The steering lock does not lock
□ Keyless access system	Cannot lock/unlock using the touch sensor (lock), touch sensor (unlock), rear gate opener button and rear lock button (lock) Cannot lock/unlock using the touch sensor (lock), touch sensor (unlock), rear gate opener button, rear lock button (lock) and power rear gate lock switch (vehicles with power rear gate).
	Cannot lock with the touch sensor (lock) Cannot unlock with the touch sensor (unlock) Cannot lock nor unlock with the touch sensor (lock), touch sensor (unlock) Rear gate can not be locked with the rear lock button		Driver's side door Passenger's side door Rear gate
	Cannot unlock with the rear gate opener button
	The access key lockout prevention feature does not function		Indoor Luggage room
	The LED does not illuminate when the access key button is pressed
	The external buzzer does not beep
	The passenger room buzzer does not sound
□ Other	The room light or map light does not illuminate ()

NOTE:

Perform the diagnosis according to the basic diagnostic procedure. Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
If the room light or map light does not illuminate and the keyless access does not function at the same time, the back-up fuse may be loose or blown.