Radar Sensor: Installation
- Attach the bracket skirt.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the radar bracket.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the radar sensor.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the bumper face rear. Ref. to EXTERIOR/INTERIOR TRIM>REAR BUMPER>INSTALLATION .
- Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Perform the adjustment of the radar sensor radar axis. Ref. to BLIND SPOT DETECTION/REAR CROSS TRAFFIC ALERT>RADAR SENSOR>ADJUSTMENT>RADAR AXIS ADJUSTMENT .