Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection/Rear Cross Traffic Alert System >> General Description >> Preparation Tool

Blind Spot Detection/Rear Cross Traffic Alert System: General Description: Preparation Tool

  1. SPECIAL TOOL
    ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
    G10273348Courtesy of SUBARU OF AMERICA, INC.
    		 87699AL00A Radar reflector Used for adjusting the radar axis of the radar sensor.
    NOTE: Attach the radar reflector to a round pole with a diameter of approx. 20 mm (0.79 in) or a 20-mm (0.79 in) square pole.
    G10289719Courtesy of SUBARU OF AMERICA, INC.
    		 - SUBARU SELECT MONITOR 4 Used for setting of each function and troubleshooting for electrical system.
    NOTE: For detailed operation procedures, refer to "Help" of application.
  2. GENERAL TOOL
TOOL NAME REMARKS
Circuit tester Used for measuring resistance, voltage and current.
DST-i Used together with Subaru Select Monitor 4.
Clip remover Used for removing clips.
Measure (5 m (16 ft) or more) Used for adjusting the radar axis of the radar sensor.
Leveling line
Plumb bob
Packing tape
Stand, tripod, etc.
scientia non olet · About Mike's Workshop Manuals