Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2019 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Fuel Injection System) >> Mass Air Flow and Intake Air Temperature Sensor >> Installation

Mass Air Flow and Intake Air Temperature Sensor: Installation

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the air flow and intake air temperature sensor and connect the connector.

    Tightening torque: 

    1 N.m (0.1 kgf-m, 0.7 ft-lb)

  2. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About Mike's Workshop Manuals