Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Starting System & Charging Systems) >> Battery Sensor >> Removal

Battery Sensor: Removal

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the connector and ground terminal.
    G13199268Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the battery sensor.
    G13199269Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals