Battery Sensor: Installation
WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
If the battery terminal is worn or the terminal part is loose, replace it with a new battery.
- Install the battery sensor.
Tightening torque:
6 N.m (0.6 kgf-m, 4.4 ft-lb)
- Connect the connector and ground terminal.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)