Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Exterior Lights (Diagnostics)) >> Control Module I/O Signal >> Electrical Specification

Electrical Specification

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
G13203568Courtesy of SUBARU OF AMERICA, INC.
Terminal NO. Contents Measuring condition Standard
(B150) NO. 1 ↔ Chassis ground Battery power supply Always 8 - 16 V
(B150) NO. 2 ↔ Chassis ground GND Always Less than 1 Ω
(B150) NO. 3 ↔ Chassis ground Ignition power supply Ignition switch ON 8 - 16 V
(B150) NO. 4 - - -
(B150) NO. 5 - - -
(B150) NO. 6 ↔ Chassis ground Leveling actuator power supply Ignition switch ON 8 - 16 V
(B150) NO. 7 ↔ Chassis ground Leveling actuator GND Always Less than 1 Ω
(B150) NO. 8 - - -
(B150) NO. 9 ↔ Chassis ground Leveling actuator signal Headlight off → on Headlight on, no vehicle height change → change and hold vehicle height for 3 seconds or more Less than 1 V → 1.0 - 14.4 V (for 17 seconds)
(B150) NO. 10 - - -
(B150) NO. 11 ↔ Chassis ground LH headlight malfunction signal Always 1 MΩ or more
(B150) NO. 12 ↔ Chassis ground RH headlight malfunction signal Always 1 MΩ or more
(B150) NO. 13 ↔ Chassis ground SRH signal (LIN)(1) Always 1 MΩ or more
(B150) NO. 14 ↔ Chassis ground SRH GND(1) Always Less than 1 Ω
(B150) NO. 15 ↔ Chassis ground CAN-H Always 1 MΩ or more
(B150) NO. 16 ↔ Chassis ground CAN-L Always 1 MΩ or more
(1) Models with steering responsive headlight