Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Power Rear Gate System) >> Power Rear Gate Driver's Switch >> Installation

Power Rear Gate Driver's Switch: Installation

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power rear gate driver's switch.
  2. Install the cover LWR driver.
  3. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>SAFETY .
scientia non olet · About Mike's Workshop Manuals