Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Lighting System) >> Auto Headlight Beam Leveler System >> Procedure >> Fuse Reset

Fuse Reset

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Park the vehicle on a level ground.
  2. Turn the ignition switch to OFF and remove the delivery mode fuse from the position (1).
  3. Install the delivery mode fuse in the position (2) and then turn the ignition switch to ON.
  4. Turn the ignition switch to OFF, install the delivery mode fuse in the position (1), and start the engine.
G13200791Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals