Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics) (Except For HEV) (4 Of 4) >> Diagnostic Procedure With Diagnostic Trouble Code (DTC) >> DTC P2610: ECM/PCM Engine Off Timer Performance >> General Description >> Execution Condition

Execution Condition

Secondary parameters Execution condition
Monitor#1 <Timer diagnosis>
Battery voltage 10.9 V or more
Ignition switch OFF
Elapsed time after starting the engine More than 19 s and Less than 61439 s
Monitor#2<Full count diagnosis>
Battery voltage 10.9 V or more
Ignition switch OFF
Counter in ECM 4 s or more
Monitor#3<Soak timer IC setting diagnosis>
Battery voltage 10.9 V or more
Ignition switch OFF
Monitor#4<Timer diagnosis (during soaking)>
Battery voltage 10.9 V or more
Ignition switch OFF
Monitor#5 <Wake-up diagnosis>
Ignition switch ON
Time in the soaking timer IC More than 3600s