Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2019 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Control Systems >> AT Shift Lock Solenoid and "P" Range Switch >> Removal >> Solenoid Unit

Solenoid Unit

  1. Remove the select lever COMPL. Ref. to CONTROL SYSTEMS>SELECT LEVER>REMOVAL .
  2. Remove the harness connector from the select lever COMPL.
    G13199847Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the harness from the select lever COMPL.
    G13199883Courtesy of SUBARU OF AMERICA, INC.
  4. Push down the claw and remove the solenoid unit from the select lever COMPL.
    G13199884Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the terminal of the solenoid unit using a flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less, KTC connector terminal tool ECC-1T or equivalent.
    G13199885Courtesy of SUBARU OF AMERICA, INC.
  6. Clean the tip of the solenoid unit.
scientia non olet · About Mike's Workshop Manuals