Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2019 >> Ascent Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sunroof >> Sunroof Control System >> Operation >> Initialize Operation >> Initialization Of The Glass Roof Control Module And The Shade Control Module That Have Not Been Initialized

Initialization Of The Glass Roof Control Module And The Shade Control Module That Have Not Been Initialized

NOTE: Perform steps  1 to  3 to enable the auto-operation and the auto-reverse operation of the glass roof control module and the shade control module.
  1. Turn the ignition switch to ON.
  2. Turn the sunroof switch ON, and operate the lid assembly front and the shade assembly to the fully open mechanical lock position.
  3. They stops at the fully open position and the initialization will be complete.
scientia non olet · About Mike's Workshop Manuals