Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> WRX STI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Fuel Injection System (Except For STI)) >> Manifold Absolute Pressure And Intake Air Temperature Sensor >> Installation

Manifold Absolute Pressure And Intake Air Temperature Sensor: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

NOTE: Use new O-rings.

Tightening Torque:

3.5 N.m (0.4 kgf-m, 2.6 ft-lb)

scientia non olet · About Mike's Workshop Manuals