Pressure Regulator & Damper Assembly: Removal
WARNING: This page is about a different variant/trim than selected.
WARNING:
Place "NO OPEN FLAMES" signs near the working area.
CAUTION:
- Be careful not to spill fuel.
- Catch the fuel from hoses using a container or cloth.
- Release the fuel pressure. Ref. to FUEL INJECTION (FUEL SYSTEMS) (STI)>Fuel>PROCEDURE>RELEASING OF FUEL PRESSURE .
- Disconnect the vacuum hose (A) from the pressure regulator and damper assembly.
- Disconnect the fuel return hose (B) and fuel hose (C) from the pressure regulator & damper assembly, and remove the fuel regulator & damper assembly.