Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> Outback 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control/Fuel System (H4DO)) >> Manifold Absolute Pressure Sensor >> Removal

Manifold Absolute Pressure Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Disconnect the connector (A) from the manifold absolute pressure sensor, and remove the manifold absolute pressure sensor from intake manifold assembly.
    G10262179Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals