Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control/Fuel System (H6DO)) >> Throttle Body >> Inspection >> Throttle Sensor (Method With SUBARU Select Monitor)

Throttle Sensor (Method With SUBARU Select Monitor)

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch to ON. (Engine OFF)
  2. Read the throttle opening angle signal and voltage of throttle sensor using Subaru Select Monitor. Ref. to ENGINE (DIAGNOSTICS) (H6DO)>Subaru Select Monitor>OPERATION>DISPLAY CURRENT ENGINE DATA .
    Throttle sensor Throttle opening angle signal Standard
    Main 0.0% Approx. 0.6 - 1.2 V
    100.0% Approx. 3.8 - 4.4 V
    Sub 0.0% Approx. 1.4 - 2.0 V
    100.0% Approx. 4.0 - 4.6 V
scientia non olet · About Mike's Workshop Manuals