Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> Impreza Base, 4D Sedan, Automatic CVT Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Wheel Alignment >> Inspection >> Caster

Wheel Alignment: Inspection: Caster

  1. Place the front wheel on the turning radius gauge. Make sure the ground contact surfaces of the front and rear wheels are at the same height.
  2. Set the adapter into the center of wheel, and then set the wheel alignment gauge.
    Fig 1: Checking Caster Angle
    G11253775Courtesy of SUBARU OF AMERICA, INC.
  3. Measure the caster angle in accordance with the operation manual for wheel alignment gauge.
Caster
5°56'
scientia non olet · About Mike's Workshop Manuals