Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> Impreza Base, 4D Sedan, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Transmission Control Systems) >> Select Lever >> Assembly >> Indicator Assembly

Indicator Assembly

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the blind A to the housing. (Model with gate shifter)
    NOTE: The blind A should be installed so that it is securely caught inside the tab of the housing.
    G12392836Courtesy of SUBARU OF AMERICA, INC.
  2. Install the blind B behind the blind A. (Model with gate shifter)
  3. Install the boot assembly. (Model with boot shifter)
  4. Install the housing to the indicator assembly. (Model with gate shifter)
  5. Install the harness connector to the front console cover, and install the indicator assembly.
scientia non olet · About Mike's Workshop Manuals