Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> Impreza Base, 4D Sedan, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Speed Control System) >> Accelerator Pedal >> Installation

Accelerator Pedal: Installation

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the accelerator pedal assembly, and connect the connector.

    Tightening torque: 

    7.5N.m (0.8kgf-m, 5.5ft-lb) 

  2. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About Mike's Workshop Manuals