Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> Impreza Base, 4D Sedan, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Control/Fuel System) >> Oil Control Solenoid >> Installation >> Intake Side

Intake Side

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a new O-ring, install the intake oil control solenoid to the chain cover.
    NOTE: Apply engine oil to O-ring.

    Tightening torque: 

    6.4N.m (0.7kgf-m, 4.7ft-lb) 

  2. Connect the connector to the intake oil control solenoid.
  3. Install the air intake duct. (RH side only) Ref. to INTAKE (INDUCTION) (H4DO)>Air Intake Duct>INSTALLATION .
  4. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About Mike's Workshop Manuals