Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> Impreza Base, 4D Sedan, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Control/Fuel System) >> Mass Air Flow and Intake Air Temperature Sensor >> Installation

Mass Air Flow and Intake Air Temperature Sensor: Installation

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the mass air flow and intake air temperature sensor, and connect the connector to the mass air flow and intake air temperature sensor.

    Tightening torque: 

    1 N.m (0.1kgf-m, 0.7ft-lb) 

  2. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About Mike's Workshop Manuals