Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> Impreza Base, 4D Sedan, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Control/Fuel System) >> Fuel Pressure Sensor >> Removal

Fuel Pressure Sensor: Removal

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Be careful not to spill fuel.
  • Catch the fuel from the pipes using a container or cloth.
  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the clip from the air intake boot, and loosen the clamp.
    G11252776Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the air intake boot, and place it aside so that it does not interfere with the work.
    CAUTION: Be careful not to pull out the PCV hose.
    G11252777Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the intake manifold assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Intake Manifold Assembly>REMOVAL .
  5. Remove the fuel injector RH. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Fuel Injector>REMOVAL>FUEL INJECTOR RH .
scientia non olet · About Mike's Workshop Manuals