Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> Impreza Base, 4D Sedan, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Control/Fuel System) >> Camshaft Position Sensor >> Installation >> Intake Side

Intake Side

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the camshaft position sensor to the chain cover with new O-ring.
    NOTE: Apply engine oil to O-ring.

    Tightening torque: 

    6.4N.m (0.7kgf-m, 4.7ft-lb) 

  2. Connect the connectors to camshaft position sensor.
  3. Install the air intake duct. (RH side only) Ref. to INTAKE (INDUCTION) (H4DO)>Air Intake Duct>INSTALLATION .
  4. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About Mike's Workshop Manuals