Ignition/Acc Change Function Check

Check push button ignition switch function

Check the power supply change control through push button ignition switch, brake pedal, clutch pedal operation, and shift position.

CVT model

Shift lever position	Brake pedal operation	Push button ignition switch operation
P	Released	Repeat Ignition switch OFF → ACC ON → Ignition switch ON → Ignition switch OFF
P	Released	Switch engine running → Ignition switch OFF
P	Depressed	Ignition switch OFF → Engine started
P	Depressed	ACC ON → Engine started
P	Depressed	Ignition switch ON → Engine started
P	Depressed	Engine running → Ignition switch OFF
N	Released	Repeat Ignition switch OFF → ACC ON → Ignition switch ON → ACC ON
N	Released	Engine running → ACC ON
N	Depressed	Ignition switch OFF → Engine started
N	Depressed	ACC ON → Engine started
N	Depressed	Ignition switch ON → Engine started
N	Depressed	Engine running → ACC ON
Other than P or N	Released	Repeat Ignition switch OFF → ACC ON → Ignition switch ON → ACC ON
Other than P or N	Released	Engine running → ACC ON
Other than P or N	Depressed	Ignition switch OFF → Ignition switch ON
Other than P or N	Depressed	ACC ON → Ignition switch ON
Other than P or N	Depressed	Engine running → ACC ON

MT model

Shift lever position	Clutch pedal operation	Push button ignition switch operation
-	Released	Repeat Ignition switch OFF → ACC ON → Ignition switch ON → Ignition switch OFF
	Released	Engine running → Ignition switch OFF
	Depressed	Ignition switch OFF → Engine started
	Depressed	ACC ON → Engine started
	Depressed	Ignition switch ON → Engine started
	Depressed	Engine running → Ignition switch OFF

Check power status display

Check the power indicator display of the push button ignition switch.

Indicator display

Push button ignition switch status

Indicator lighting status

Ignition switch OFF (except for condition ⁽¹⁾)

Light OFF

ACC ON (except for condition ⁽¹⁾)

Orange light

Ignition switch ON (except for condition ⁽¹⁾)

Orange light

Engine start standby (⁽¹⁾)

Green light (⁽²⁾)

After engine is started

Light OFF

NOTE:

⁽¹⁾	Key collation is normal, and the stop light switch (CVT) or clutch switch (MT) is ON.

⁽²⁾	For CVT models, while the select lever button is being pressed, the indicator does not illuminate in green even if the select lever is in P range.

NOTE: The indicator blinks if any of the following malfunctions are detected.

Detected malfunction	Indicator lighting status
Steering lock stuck	Green blinking
Clutch switch failure	Orange blinking
Steering lock CM internal malfunction	Orange blinking
Keyless access CM internal malfunction	Orange blinking
Vehicle speed signal malfunction	Orange blinking