DTC P1C00: Battery Monitor Module "A" Performance: Notes

DTC detecting condition:

Immediately at fault recognition

CAUTION: After servicing or replacing faulty parts, perform Clear Memory Ref. to ENGINE (DIAGNOSTICS) (H4DO)>CLEAR MEMORY MODE and Inspection Mode Ref. to ENGINE (DIAGNOSTICS) (H4DO)>INSPECTION MODE .

CHECK DTC.
Using the Subaru Select Monitor or a general scan tool, read the DTC of [Engine]. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>READ DIAGNOSTIC TROUBLE CODE (DTC) .

Is DTC P1C00 displayed? (Current malfunction)

Yes: Replace the battery sensor. Ref. to STARTING/CHARGING SYSTEMS(H4DO)>BATTERY SENSOR .

No: Even if DTC is detected, it has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again.