Non-Turbo Model
Assemble in the reverse order of disassembly.
NOTE:
- Refer to component for tightening torque of each part. Ref. to STARTING/CHARGING SYSTEMS (H4DO)>General Description>COMPONENT>GENERATOR .
- After assembling, manually turn the pulley to check that the rotor rotates smoothly.
- Install the ball bearings.
- Set the ball bearings in the front cover, then securely install an appropriate tool (such as a socket wrench of proper size) to the bearing outer race.
- Using a press to press the ball bearings into the specified location.
- Install the bearing retainer.
- Push of the brush
When installing the brush assembly to the generator, push in the brush into the brush holder, and hold it with your fingers or a socket wrench of an appropriate size etc. until the installation is completed.