AT Shift Lock Solenoid and "P" Range Switch: Inspection

CHECK SOLENOID UNIT .
Measure the resistance of solenoid unit connector terminals.

Terminals

No. 4-No. 3:

Is the resistance 27.6-30.5 Ω?

Yes: Go to 2.

No: Replace the solenoid unit. Ref. to CONTROL SYSTEMS>AT SHIFT LOCK SOLENOID AND "P" RANGE SWITCH .
CHECK SOLENOID UNIT .
Connect the battery to the solenoid unit connector terminals, and then operate the solenoid.

Terminals

No. 3 (+)-No. 4 (-):

Does the solenoid unit operate normally?

Yes: Go to 3.

No: Replace the solenoid unit. Ref. to CONTROL SYSTEMS>AT SHIFT LOCK SOLENOID AND "P" RANGE SWITCH .
CHECK "P" RANGE SWITCH .
1. Shift the select lever to "P" range.
2. Measure the resistance between "P" range switch connector terminals.
  Terminals
  
  No. 1-No. 2:
  
  Is the resistance less than 1 Ω?
  
  Yes: Go to 4.
  
  No: Replace the "P" range switch. Ref. to CONTROL SYSTEMS>AT SHIFT LOCK SOLENOID AND "P" RANGE SWITCH .
CHECK "P" RANGE SWITCH .
1. Set the select lever to other than "P" range.
2. Measure the resistance between "P" range switch connector terminals.
  Terminals
  
  No. 1-No. 2:
  
  Is the resistance 1 MO or more?
  
  Yes: Normal.
  
  No: Replace the "P" range switch. Ref. to CONTROL SYSTEMS>AT SHIFT LOCK SOLENOID AND "P" RANGE SWITCH .