Control Valve Body: Inspection
WARNING: This page is about a different variant/trim than selected.
- Check each part for damage or dust.
- Measure the resistance of each solenoid, sensor and ground wire.NOTE: Measurement should be performed at a temperature of 20°C (68°F).
- Solenoid
Solenoid Terminal No. Standard Primary UP solenoid No. 2-Control valve body Approx. 10-13.5 Ω Secondary solenoid No. 3-Control valve body Approx. 5-7 Ω F & R clutch solenoid No. 4-Control valve body Approx. 4-6 Ω Primary DOWN solenoid No. 7-Control valve body Approx. 10-13.5 Ω Lock-up duty solenoid No. 9-Control valve body Approx. 10-13.5 Ω AWD solenoid No. 10-Control valve body Approx. 2-4.5 Ω - Oil temperature sensor
Sensor Terminal No. Standard
At 20°C (68°F)Oil temperature sensor No. 1-No. 6 Approx. 2.5 kΩ - Transmission ground
Terminal No. Standard No. 8-Control valve body Less than 1 Ω