| Time when Evaporative Leak Check |
Less than |
| Module switching valve is closed |
120000ms |
| Purge control duty ratio |
More than 0% |
| Preconditions |
|
| (Condition: Close the intrusive Evaporative Leak Check Module switching valve) |
|
| Battery voltage |
10.9 V or more |
| Barometric pressure |
75.1kPa (563mm Hg, 22.2inHg) or more |
| Cumulative value of purge gas amount calculated from engine start |
Value of Map or more |
| Atmospheric pressure - Intake manifold absolute pressure |
6.7kPa (50mmHg, 2inHg) or more |
| (Elapsed time after fuel cut Fuel shut-off function thereafter) |
1000ms or more Not in operation |
| Ambient temperature |
-25°C (-13°F) or more |