Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle - Service Information >> Transmission Mounting System >> Installation >> Pitching Stopper

Pitching Stopper

  1. Install the pitching stopper.

    Tightening torque: 

    T1: 50 N.m (5.1kgf-m, 36.9ft-lb) 

    T2: 58 N.m (5.9kgf-m, 42.8ft-lb)

    G11255559Courtesy of SUBARU OF AMERICA, INC.
  2. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO)>Air Intake Boot>INSTALLATION .
  3. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>SAFETY .
scientia non olet · About Mike's Workshop Manuals