Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2018 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle - Service Information >> Secondary Pressure Sensor >> Inspection

Secondary Pressure Sensor: Inspection

  1. Start and warm up the engine.
  2. Depress the brake pedal, and shift the select lever to "D" range.
  3. Shift the select lever to "P" or "N" range.
  4. Depress the brake pedal and hold it.
  5. Check «secondary pressure sensor voltage» by using Subaru Select Monitor while the engine is idling. Ref. to TRANSMISSION (DIAGNOSTICS)>Data Monitor>OPERATION .

    Standard 

    Approx. 0.8 V

  6. Check «secondary pressure sensor voltage» by using Subaru Select Monitor while the engine is stopped and the ignition switch is turned on. Ref. to TRANSMISSION (DIAGNOSTICS)>Data Monitor>OPERATION .

    Specification: 

    Approx. 0.5 V

scientia non olet · About Mike's Workshop Manuals