Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2017 >> WRX STI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Lubrication System (2.0L)) >> Oil Level Switch >> Removal >> When Removing Front CROSSMEMBER

When Removing Front CROSSMEMBER

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front crossmember. <Ref. to REMOVAL , Front Crossmember.>
  2. Disconnect the oil level switch connector from the engine harness, and remove the clip (A) securing the harness.
    Fig 1: Locating Oil Level Switch Connector And Clip
    G09476614Courtesy of SUBARU OF AMERICA, INC.
  3. Remove clip (A) from the oil pan upper, and remove the oil level switch.
Fig 2: Locating Oil Level Switch Clip
G09476529Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals