Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires, Wheels & Tire Pressure Monitoring System (TPMS) (Service Information) >> Tire Pressure Monitoring System >> Removal >> TPMS Control Module

TPMS Control Module

NOTE: TPMS control module for model with keyless access with push button start is separated from the keyless access control module.
  1. Disconnect the ground cable from battery. <Ref. to BATTERY , NOTE, Note.>
    NOTE: For model with battery sensor, remove the ground terminal from battery sensor.
  2. Remove the trunk room mat.
  3. Remove the trim panel - trunk rear.
    1. Remove the clip.
    2. Release the claws, and remove the trim panel - trunk rear.
    Fig 1: Locating Trunk Rear Trim Panel Claws
    G10269504Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the trim panel - trunk side LH. <Ref. to REMOVAL , Trunk Room Trim.>
  5. Remove the TPMS control module.
    1. Disconnect the connector.
    2. Remove the nuts to remove the TPMS control module.
    Fig 2: Locating TPMS Control Module Nuts
    G10269505Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals