Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Starting System & Charging System (H6DO)) >> Battery Sensor >> Removal

Battery Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
  2. Remove the clip (A) from the battery holder.
  3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor.
    Fig 1: Disconnecting Connector And Battery Holder Clip
    G10263203Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals